Infectious Crystalline Keratopathy Caused by Alternaria

PURPOSE: To report a case of infectious crystalline keratopathy caused by Alternaria in the corneal center. CASE SUMMARY: A 66-year-old male visited our clinic with right ocular pain and visual loss after corneal trauma caused by a foreign body hitting his right eye while performing farm work 1 month prior to his visit. The patient had no history of corneal surgery and long-term use of topical corticosteroid. A corneal epithelial defect and whitish snowflake margin infiltration around the corneal stroma were observed in the corneal center, but there was an absence of conjunctival injection and anterior segment inflammation. Cultures and a biopsy of the corneal scrapings revealed Alternaria species fungus. The patient was treated with 1% topical voriconazole and 0.5% moxifloxacin, together with oral voriconazole (400 mg/day). After 2 months of treatment, the disease was completely cured, with a minute corneal opacity. CONCLUSIONS: We successfully treated a rare case of infectious crystalline keratopathy caused by Alternaria, which has not been previously reported in the Republic of Korea.

Fabrication of rough surface on titanium using electrochemical treatment in NaCl electrolyte / 대한치과재료학회지

It is difficult to get sufficient roughness on titanium implant surface using traditional electrochemical treatments. In this study, we have developed a new method which provides a hybrid structured titanium surface having micro/nano roughness using electrochemical treatment in NaCl electrolyte and hydrothermal treatment. Titanium disks were anodically oxidized (ANO) in 0.15M NaCl electrolyte by applying positive electric pulses. The oxide compounds loosely attached to the surface were removed by ultrasonic cleaning (ANO group). These specimens were hydrothermally (HT) treated in an alkaline solution (ANO-HT group). ANO group showed the dimpled grain surfaces with a diameter of approximately 30 µm, and its roughness (Ra) was about 2.4 µm. The nano-sized crystallites which had an anatase TiO₂ crystalline structure were uniformly distributed on the surface of ANO-HT group. This group still retained high roughness (~2.7 µm) similar to ANO group and showed high hydrophilicity. Titanium surface with high roughness and hydrophilicity was fabricated using new electrochemical treating method and hydrothermal treatment. This surface modification method could be used for enhancing the osteoconductivity of the titanium implants.

Mechanical Properties and Microstructure of the Leucite-Reinforced Glass-Ceramics for Dental CAD/CAM / 치위생과학회지

The computer-aided design/computer-aided manufacturing (CAD/CAM) system was introduced to shorten the production time of all-ceramic restorations and the number of patient visits. Among these types of ceramic for dental CAD/CAM, they have been processed into inlay, onlay, and crown shapes using leucite-reinforced glass-ceramics to improve strength. The purpose of this study was to observe the mechanical properties and microstructure of leucite-reinforced glass-ceramics for dental CAD/CAM. Two types of leucite-reinforced glass-ceramic blocks (IPS Empress CAD, Rosetta BM) were prepared with diameter of 13 mm and thickness of 1 mm. Biaxial flexural testing was conducted using a piston-on-three-ball method at a crosshead speed of 0.5 mm/min. Weibull statistics were used for the analysis of biaxial flexural strength. Fracture toughness was obtained using an indentation fracture method. Specimens were observed by field emission scanning electron microscopy to examine the microstructure of the leucite crystalline phase after acid etching with 0.5% hydrofluoric acid aqueous solution for 1 minute. The results of strength testing showed that IPS Empress CAD had a mean value of 158.1±8.6 MPa and Rosetta BM of 172.3±8.3 MPa. The fracture toughness results showed that IPS Empress CAD had a mean value of 1.28±0.19 MPa·m(1/2) and Rosetta BM of 1.38±0.12 MPa·m(1/2). The Rosetta BM sample exhibited higher strength and fracture toughness. Moreover, the crystalline phase size and ratio were increased in the Rosetta BM sample. The above results are expected to elucidate the basic mechanical properties and crystal structure characteristics of IPS Empress CAD and Rosetta BM. Additionally, they will help develop leucite-reinforced glass-ceramic materials for CAD/CAM.

Tophaceous Gout of the Lumbar Spine Mimicking Infectious Spondylodiscitis and Epidural Abscess / 대한척추외과학회지

STUDY DESIGN: Case report OBJECTIVES: We report a case of surgically proven tophaceous gout of the lumbar spine at the L5-S1 level in a 43-year-old man that mimicked infectious spondylodiscitis and epidural abscess on magnetic resonance (MR) images. SUMMARY OF LITERATURE REVIEW: Some patients have chronic back pain with an epidural mass. Among the many causes of epidural masses, tophaceous gout of the lumbar spine is very rare. MATERIALS AND METHODS: A 43-year-old man presented with fever and chronic back pain with radiating pain. In an MR image of L4-5, an abnormal subcutaneous mass was found in the posterior epidural space. The subcutaneous mass was isointense on T1-weighted images compared with the intervertebral disc, and focally and strongly hyperintense and heterogeneous on T2-weighted images. After the intravenous administration of gadolinium contrast, the mass was fairly homogenous, with a low signal intensity and without enhancement. With the diagnosis of infective spondylitis with epidural abscess, we performed a decompressive mass resection. RESULTS: The pathologic examination revealed multinuclear giant cells and amorphous crystalline fibrous tissue. The lesion was diagnosed as tophaceous gout. CONCLUSIONS: This case underscores the importance of considering tophaceous gout in the differential diagnosis of an epidural mass in a patient with chronic back pain.

Hydroxyapatite Coatings on Titanium Using Electrochemical Deposition Method at Body Fluid Temperature / 대한치과재료학회지

In this study, hydroxyapatite (HAp) was coated on titanium using electrochemical deposition (ECD) method at body fluid temperature. The titanium specimens for ECD were prepared by chemically etching treatment using 5M NaOH solution. The electrolyte mixed with 5 mM Ca(NO³)² and 2 mM NH⁴H²PO⁴ which has pH 5 (E2) was adjusted to pH 3 (E1) and pH 6 (E3). The different electric pulses of −10, −15, −30 mA were applied to each specimen. The temperature of electrolytes was kept at 37℃. E1-10, E1-15, E1-30, E2-10, E2-15, E2-30, E3-10, E3-15, and E3-30 groups were prepared for this study. Scanning electron microscope (SEM) images showed that E1-10 and E1-15 groups were not coated and the powder-shaped compounds were formed on E3-15 and E3-30 groups. The cracks were observed on the surface of E1-30 and E2-30 groups. The evenly and stable coated layer was deposited on E2-10, E2-15 and E3-10 groups. The layer coated on titanium surface had an HAp crystalline structure. E1-30 and E2-30 groups had low crystallinity, even though they had thick layer. HAp layer on for E2-10 group was well deposited on the surface because it more aligned to c-axis compared with other groups.

The effect of light sources and CAD/CAM monolithic blocks on degree of conversion of cement

PURPOSE: To assess the degree of conversion (DC) and light irradiance delivered to light-cured and dual-cured cements by application of different light sources through various types of monolithic computer-aided design and computer-aided manufacturing (CAD/CAM) materials. MATERIALS AND METHODS: RelyX Ultimate Clicker light-cured and dual-cured resin cement specimens with 1.5-mm thicknesses (n=300, 10/group), were placed under four types of crystalline core structure (Vita Enamic, Vita Suprinity, GC Ceresmart, Degudent Prettau Anterior). The specimens were irradiated for 40 seconds with an LED Soft-Start or pulse-delay unit or 20 seconds with a QTH unit. DC ratios were determined by using Fourier transform infrared spectroscopy (FTIR) after curing the specimen at 1 day and 1 month. The data were analyzed using the Mann-Whitney U test (for paired comparison) and the Kruskal-Wallis H test (for multiple comparison), with a significance level of P < .05. RESULTS: DC values were the highest for RelyX Ultimate Clicker light-cure specimens polymerized with the LED Soft-Start unit. The combination of the Vita Suprinity disc and RelyX Ultimate Clicker dual-cure resin cement yielded significantly higher values at both timepoints with all light units (all, P < .05). CONCLUSION: Within the limitations of this study, we conclude that the DC of RelyX Ultimate Clicker dual-cure resin cement was improved significantly by the use of Vita Suprinity and the LED Soft-Start light unit. We strongly recommend the combined use of an LED light unit and dual-cure luting cement for monolithic ceramic restorations.

Silica exposure and work-relatedness evaluation for occupational cancer in Korea

Crystalline silica has been classified as a definite carcinogen (Group 1) causing lung cancer by the International Agency for Research on Cancer (IARC). In Korea, crystalline silica has been the most common causal agent for workers to apply to the Korea Workers' Compensation and Welfare Service (KWCWS). We used KWCWS data to evaluate workers' crystalline silica exposure levels according to their occupations and industries, and reviewed research papers describing the dose-response relationship between cumulative exposure levels and lung cancer incidence. In addition, we reviewed lung cancer cases accepted by the KWCWS, and suggest new criteria for defining occupational cancer caused by crystalline silica in Korea. Rather than confining to miners, we propose recognizing occupational lung cancer whenever workers with pneumoconiosis develop lung cancer, regardless of their industry. Simultaneous exposure and lag time should also be considered in evaluations of work-relatedness.

Influence of Water Infiltration and Flexural Strength Change with Glazing Treatment of Dental Porcelain / 치위생과학회지

The purpose of this study was to evaluate the influence of water infiltration and flexural strength changes in dental porcelain with glazing treatment. The block specimens were prepared as experimental materials, using feldspar type commercial dental porcelain; then, these were fired at 940oC for 1 minute. The fired specimens were polished with a dimension of 40×5.5×5 mm. The specimens were distributed to two experimental groups: with and without glazing treatment specimens (n=5), and they were immersed in a solution of pH 7 for 3, 7, and 20 days at 40℃ after fabrication. To evaluate the flexural strength changes with water infiltration treatment in specimens with and without glazing, the 3-point flexural test was performed, using a universal testing machine until failure occurred. Starting powder and fired specimens consisted of amorphous and leucite crystalline phase. The Vickers hardness of fired specimens was more than 1.6 times higher than that of the enamel of natural teeth. According to porosimeter results, the specimens without glazing treatment exhibited a porosity of about 14.7%, whereas the glazed specimens exhibited the lowest porosity at about 1.1%. The average flexural strength of glazed specimens was higher than the flexural strength of specimens without glazing treatment (p<0.05). The flexural strength of all specimens with and without glazing treatment deteriorated with accelerated aging in the solution. In addition, significant differences between these two treatment groups were observed in all of the specimens treated at various water infiltration periods (p<0.05). The exposure of internal pores and micro-cracks in the surface due to polishing of the fired specimens influenced mechanical behaviors. Especially, the flexural strength in specimens without glazing treatment has shown significant degradation with the infiltration of water. Therefore, this study suggests that glazing processes can improve mechanical properties of dental porcelain.

Particulate Matter (Fine Particle) and Urologic Diseases / 대한배뇨장애요실금학회지

Particulate matter (PM) has been found to damage vital body organs, including the lungs and heart, through vascular damage and oxidative stress. Recently, renal function and chronic urologic diseases have also been found to be related to PM. To investigate this, we reviewed the characteristics of PM related to renal toxicity, including recent studies on the associations of urologic diseases with PM. PM can include constituents that cause renal toxicity, such as lead, cadmium, arsenic, and crystalline silica, which result in renal tubular or interstitial damage. Since 2008, 7 studies have evaluated the renal effects of PM. Two prospective cohort studies and a quantitative study of consecutive patients showed that PM may be related to decreased renal function, as shown by the estimated glomerular filtration rate of diseased or aged participants. Two cross-sectional studies found an association between PM and chronic kidney disease. One of those studies identified the specific renal diseases of immunoglobulin A nephropathy and membranous nephropathy. Two studies that analyzed renal cancer and PM showed no evidence that renal cancer is related to PM. Nine studies were evaluated regarding the relationship of bladder and prostate cancer with PM. The evidence for an association of PM with bladder and prostate cancer is still inconclusive. Although some recently published studies have shown a significant relationship, the causal relationship is not clear. Further well-designed studies on specific renal diseases are required.

Systemic sclerosis due to crystalline silica exposure among jewelry workers in Korea: two case reports

BACKGROUND: Occupational exposure to crystalline silica is a potential risk factor for various systemic autoimmune diseases including systemic sclerosis. The etiology of systemic sclerosis is not conclusively known, but there are epidemiological studies that show the relationship between exposure to crystalline silica and risk of systemic sclerosis. Here we report, for the first time, two cases of crystalline silica-related systemic sclerosis in patients who worked in crystal processing in the jewelry-manufacturing field. CASE PRESENTATION: Case 1 is a 57-year-old man who had worked mainly in crystal processing for multiple jewelry-processing companies for 17 years, since the age of 15 years. He contracted tuberculosis at the age of 25 years and showed Raynaud's phenomenon of both the hands and feet at age 32 years. Digital cyanosis and sclerosis developed at approximately age 41 years. The patient was diagnosed with systemic sclerosis at age 48 years. Case 2 is a 52-year-old man who worked in crystal processing for various jewelry-processing companies for 7 years, since the age of 23 years. He first showed signs of cyanosis in the third and fourth digits of both hands at age 32 years, was diagnosed with Raynaud's syndrome at age 37 years, and was diagnosed with systemic sclerosis at age 38 years. Crystal processing is a detailed process that involves slabbing and trimming the selected amethyst and quartz crystals, which requires close proximity of the worker's face with the target area. In the 1980s and 1990s, the working hours were 12 h per day, and the working environment involved 15 workers crowded into a small, 70-m2 space with poor ventilation. CONCLUSION: Two workers who processed crystals with a maximum crystalline silica content of 56.66% developed systemic sclerosis. Considering the epidemiological and experimental evidence, exposure to crystalline silica dust was an important risk factor for systemic sclerosis. An active intervention is necessary to reduce exposure in similar exposure groups in the field of jewelry processing.

Early changes in retinal structure and BMP2 expression in the retina and crystalline lens of streptozotocin-induced diabetic pigs / 한국실험동물학회지

PURPOSE: This study aims to evaluate early changes in retinal structure and BMP2 expression in the retina and crystalline lens by comparing streptozotocin-induced diabetic pigs and normal control group pigs. METHODS: Five eye samples from five diabetic Micro-pigs (Medikinetics, Pyeongtaek, Korea) and five eye samples from five control pigs bred in a specific pathogen-free area were used. Diabetes was developed through intravenous injection of nicotinamide and streptozotocin, and the average fasting glucose level was maintained at 250 mg/dL or higher for 16 weeks. To evaluate BMP2 expression in the retina and crystalline lens, Western blotting was performed. RESULTS: In Hematoxylin and Eosin staining, most diabetic pigs showed structural abnormalities in the inner plexiform layer. The number of nuclei in the ganglion cell layer within the range of 10⁴µm² was 3.78±0.60 for diabetic pigs and 5.57±1.07 for control group pigs, showing a statistically significant difference. In immunohistochemical staining, diabetic retinas showed an overall increase in BMP2 expression. In Western blotting, the average BMP2/actin level of diabetic retinas was 1.19±0.05, showing a significant increase compared to the 1.06±0.03 of the control group retinas (P=0.016). The BMP2/actin level of diabetic crystalline lenses was similar to the control group crystalline lenses (P=0.730). CONCLUSIONS: Compared to control group pigs, the number of nuclei in the inner nuclear layer of retinas from streptozotocin-induced diabetic pigs decreased, while an increase in BMP2 expression was observed in the retina of diabetic pigs.

Porous Crosslinked Polycaprolactone Hydroxyapatite Networks for Bone Tissue Engineering

In this study, porous scaffolds were produced by a thermal crosslinking of polycaprolactone diacrylate in the presence of hydroxyapatite (HA) and particulate leaching technique with sodium chloride as the water soluble porogen for bone tissue engineering applications. The prepared scaffolds were characterized using techniques such as Field Emission Scanning Electron Microscopy, Differential Scanning Calorimetry, and Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy. Moreover, dynamic mechanical properties were investigated using Dynamic Mechanical Thermal Analysis. The obtained scaffolds present a porous structure with interconnected pores and porosity around 73%. It was found that the incorporation of HA particles to polycaprolactone (PCL) matrix resulted in an increased crystallinity. Moreover, both the storage modulus (E′) and glass transition temperature (T(g)) increased, while the loss factor (tan δ) decreased due to the hindrance of the HA particles to the mobility of polymer segments. Cytocompatability of the scaffolds was assessed by MTT assay and cell attachment studies. Osteoconductivity of the scaffolds was investigated with cells alkaline phosphatase extraction. The levels of alkaline phosphatase activity were found to be higher for PCL/HA network scaffold than for PCL network scaffold. In addition, cytocompatibility of the PCL/HA network scaffold indicated no toxicity, and cells were attached and spread to the scaffold walls.

Chitosan-Poly(Vinyl Alcohol) Nanofibers by Free Surface Electrospinning for Tissue Engineering Applications

Deformities in tissues and organs can be treated by using tissue engineering approach offering the development of biologically functionalized scaffolds from a variety of polymer blends which mimic the extracellular matrix and allow adjusting the material properties to meet the defect architecture. In recent years, research interest has been shown towards the development of chitosan (CS) based biomaterials for tissue engineering applications, because of its minimal foreign body reactions, intrinsic antibacterial property, biocompatibility, biodegradability and ability to be molded into various geometries and forms thereby making it suitable for cell ingrowth and conduction. The present work involves the fabrication of nanofibrous scaffold from CS and poly(vinyl alcohol) blends by free-surface electrospinning method. The morphology and functional characteristics of the developed scaffolds were assessed by field emission scanning electron microscopy and fourier transformed infra-red spectra analysis. The morphological analysis showed the average fiber diameter was 269 nm and thickness of the mat was 200–300 µm. X-ray diffraction study confirmed the crystalline nature of the prepared scaffolds, whereas hydrophilic characteristic of the prepared scaffolds was confirmed by measured contact angle. The scaffolds possess an adequate biodegradable, swelling and mechanical property that is found desirable for tissue engineering applications. The cell study using umbilical cord blood-derived mesenchymal stem cells has confirmed the in vitro biocompatibility and cell supportive property of the scaffold thereby depicting their potentiality for future clinical applications.

To Report a Case of Tamoxifen-induced Retinopathy Diagnosed Using Spectral Domain Optical Coherence Tomography

PURPOSE: To report a case of tamoxifen-induced retinopathy diagnosed using spectral domain optical coherence tomography (SD-OCT). CASE SUMMARY: A 44-year-old female presented with metamorphopsia in the left eye and binocular vision loss which started 5 months prior. She had no record of external trauma, diabetes or high blood pressure; however, she had been taking 21.9 g tamoxifen (20 mg/day) since October 2012 after a surgery of her left breast due to cancer. On the initial visit, fundus photography showed crystalline dot-like deposits in both parafoveae. Additionally, fluorescence angiography revealed a small leakage around the macular area. Optical coherence tomography (OCT) was obtained to differentiate from other diseases because fundus photography showed crystalline retinopathy. The OCT revealed a normal right eye but the left macula had a microcystic lesion. Based on the diagnosis of tamoxifen-induced retinopathy, the patient stopped taking tamoxifen. Three months after discontinuation of tamoxifen, fundus photography showed slightly decreased crystalline deposits in the parafoveal area and visual acuity of the right eye was slightly improved. However, SD-OCT showed a slightly aggravated disruption of the outer retina in both eyes. CONCLUSIONS: Although retinopathy caused by treatment with tamoxifen occurs infrequently, to prevent complications and irreversible damage, patients who take tamoxifen for medical purposes need to undergo a regular ophthalmologic examination.

Preparation and antimicrobial assay of ceramic brackets coated with TiO2 thin films / 대한치과교정학회지

OBJECTIVE: Different methods have been utilized to prevent enamel demineralization and other complications during orthodontic treatment. However, none of these methods can offer long-lasting and effective prevention of orthodontic complications or interventions after complications occur. Considering the photocatalytic effect of TiO2 on organic compounds, we hoped to synthesize a novel bracket with a TiO2 thin film to develop a photocatalytic antimicrobial effect. METHODS: The sol-gel dip coating method was used to prepare TiO2 thin films on ceramic bracket surfaces. Twenty groups of samples were composed according to the experimental parameters. Crystalline structure and surface morphology were characterized by X-ray diffraction and scanning electron microscopy, respectively; film thickness was examined with a surface ellipsometer. The photocatalytic properties under ultraviolet (UV) light irradiation were analyzed by evaluating the degradation ratio of methylene blue (MB) at a certain time. Antibacterial activities of selected thin films were also tested against Lactobacillus acidophilus and Candida albicans. RESULTS: Films with 5 coating layers annealed at 700℃ showed the greatest photocatalytic activity in terms of MB decomposition under UV light irradiation. TiO2 thin films with 5 coating layers annealed at 700℃ exhibited the greatest antimicrobial activity under UV-A light irradiation. CONCLUSIONS: These results provide promising guidance in prevention of demineralization by increasing antimicrobial activities of film coated brackets.

Crystalline podocytopathy and tubulopathy without overt glomerular proteinuria in a patient with multiple myeloma

Crystalline nephropathy is a rare yet well-known condition associated with multiple myeloma and other light chain–secreting disorders. Paraproteins that are resistant to proteolysis crystallize within proximal tubular cells and cause light-chain proximal tubulopathy, which presents clinically as Fanconi syndrome. Podocytes are rarely affected, and the crystalline inclusions within podocytes are typically precipitated, yielding significant glomerular proteinuria. Here we report a case of extensive crystalline inclusions primarily within podocytes and proximal tubules that presented only with Fanconi syndrome and renal insufficiency. Despite the presence of extensive crystalline inclusions in podocytes and diffuse foot process effacement, the patient had no clinical evidence suggestive of podocyte injury.

Risk Assessment of Exposure to Silica Dust in Building Demolition Sites

BACKGROUND: Building demolition can lead to emission of dust into the environment. Exposure to silica dust may be considered as an important hazard in these sites. The objectives of this research were to determine the amount of workers' exposure to crystalline silica dust and assess the relative risk of silicosis and the excess lifetime risk of mortality from lung cancer in demolition workers. METHODS: Four sites in the Tehran megacity region were selected. Silica dust was collected using the National Institute for Occupational Safety and Health method 7601 and determined spectrophotometrically. The Mannetje et al and Rice et al models were chosen to examine the rate of silicosis-related mortality and the excess lifetime risk of mortality from lung cancer, respectively. RESULTS: The amount of demolition workers' exposure was in the range of 0.085-0.185 mg/m³. The range of relative risk of silicosis related mortality was increased from 1 in the workers with the lowest exposure level to 22.64/1,000 in the employees with high exposure level. The range of the excess lifetime risk of mortality from lung cancer was in the range of 32-60/1,000 exposed workers. CONCLUSION: Geometric and arithmetic mean of exposure was higher than threshold limit value for silica dust in all demolition sites. The risk of silicosis mortality for many demolition workers was higher than 1/1,000 (unacceptable level of risk). Estimating the lifetime lung cancer mortality showed a higher risk of mortality from lung cancer in building demolition workers.

Three Cases of Outer Retinal Tubulation in Bietti's Crystalline Dystrophy

PURPOSE: To report the prevalence and the characteristics of outer retinal tubulation (ORT) in Bietti's crystalline dystrophy in 6 eyes of 3 patients. CASE SUMMARY: Three patients with Bietti's crystalline dystrophy were examined using color fundus photography, fundus autofluorescence picture, spectral domain optical coherence tomography (SD-OCT), fluorescein angiography, electroretinogram and electrooculogram. ORT was detected in 3 of 3 (100%) Bietti's crystalline dystrophy patients. SD-OCT B-scan revealed hyperreflective material inside the hyporeflective internal space with hyperreflective border. ORT was observed under the fovea or outside the fovea and on the outer nuclear layer in the retina. ORTs were no greater than 70 x 140 microm in size when measured using SD-OCT B-scan image. CONCLUSIONS: ORT was observed frequently in patients with Bietti's crystalline dystrophy. These findings can potentially predict the extensive photoreceptor abnormalities in retinal pigment epithelial atrophy.

Clinical Features of Acinetobacter Baumannii Keratitis

PURPOSE: Acinetobacter species are common aerobic gram-negative bacterium that contain polymorphisms. Acinetobacter baumannii keratitis has recently received attention, and has various clinical features. Therefore, it is crucial to determine the appropriate medical treatment for Acinetobacter baumannii keratitis. CASE SUMMARY: There were two infectious crystalline keratitis patients, two other patients that were co-infected with fungus, and the last patient who had the peripheral corneal ulcer type of keratitis. CONCLUSIONS: Acinetobacter baumannii keratitis demonstrates multiple clinical features. It forms a biofilm that can bring possible resistance to therapy, and it can also co-infect with fungus. In contrast to general bacterial keratitis which occurs in the form of a central corneal ulcer, we found Acinetobacter baumannii to take on the form of a peripheral corneal ulcer in our experiments on the five keratitis patients. Although Acinetobacter species were originally found to be multidrug-resistant, such resistance was not found in our experiments. However, due to the various problems associated with Acinetobacter baumannii, it is always critical for medical staff to take infection of Acinetobacter baumannii into consideration in keratitis patients.

Expression and mechanism of alphaB-crystallin in retina and extraocular tissues and organs / 法医学杂志

alphaB-crystallin is the structural protein of vertebrate lens, which is widely expressed in non-lens tissue. As one of the heat shock protein family members, alphaB-crystallin possesses biological properties of molecular chaperones and anti-apoptotic effects. Multi-factor injuries, such as retinopathy, inflammation and nervous system diseases, have a closely relationship with alphaB-crystallin. This paper reviews the research progress of the expression and mechanism of alphaB-crystallin in retina and extraocular tissues and organs.